Showing 3 Result(s)
What You Should Know About Waterproofing;
Construction

What You Should Know About Waterproofing

Waterproofing products are products used in the construction, remodeling, and repair of all types of works that prevent water, from any source, from entering construction.

What types of waterproofing can be used in construction?

  • Synthetic waterproofing
  • Natural waterproofing
  • Stone waterproofing
  • Metal waterproofing

When used each of these types of waterproofing?

It depends on the surface to be waterproofed and its capacity as a thermal insulator.

If a wall or wall does not have a good capacity or lacks an air chamber, no waterproofing can be applied. In these specific cases, a breathable product should be applied to avoid internal condensation on the walls.

Next, we will mention the characteristics of each type.

Synthetic waterproofing

What is synthetic waterproofing?

Asphalt fabrics: they are the type of waterproofing most used on ceilings. It comes from petroleum products, and its durability is more than ten years.

Nanotechnological waterproofing:

Products made with a formulation that acts at the atomic scale. It guarantees surface tightness and also allows it to perspire.

Breathable waterproof sheets:

Plastic fabric composed of fibers that do not degrade over time.

They should not be placed directly outdoors.

Polymeric resins:

Hot application

Durability: the manufacturer guarantees a duration of more than 25 years, maintaining its qualities

 (DITE) Cold application polyurethane

Durability: over 50 years if the product is protected from the weather.

Acrylic resins

Cold application

Durability: the manufacturer: guarantees duration between 3 and 10 years, maintaining its qualities, depending on its formulation.

Epoxy resins

Cold application

Durability: the manufacturer guarantees a duration of 3 years, maintaining its qualities.

What are the natural waterproofing?

Those from the vegetable kingdom such as latex which is the most used

Different compounds from latex:

Chloro rubber:

  • Weather stable properties.
  • Cold application.
  • Durability: the manufacturer guarantees a duration of 3 years while maintaining its qualities.

EPDM:

  • Ethylene rubber.
  • Cold application.
  • Durability: the manufacturer guarantees a duration of 5 years while maintaining its qualities.

What is inorganic waterproofing of stone nature?

These materials can be:

Blackboard

Granite: less common of the two. Duration greater than 50 years, minimum maintenance.

Silicone:  comes from silica in a liquid state. Durability: the manufacturer guarantees a duration of 3 years while maintaining its qualities.

Ceramic materials such as tile:  ecological product. Durability: the manufacturer guarantees a duration of 10 years while maintaining its qualities.

Cement materials: Many possibilities to formulate this type of cement-based waterproofing. It may or may not be breathable, and it is advisable to review the product data-sheet. Durability: the manufacturer guarantees a duration of 3 years while maintaining its qualities. The more complex systems may have a longer duration exceeding 50 years.

One of these products is the cement-derived fiber cement, originally with added asbestos fibers, glass fibers are currently added.

What are inorganic waterproofing materials of a metallic nature?

These products are those used in certain constructions, especially in industrial-style homes, in industrial buildings and covering areas in multi-purpose facilities, with iron or concrete structure.

The products that they mainly use are:

  • Zinc
  • Copper
  • Natural aluminum
  • Lacquered aluminum
  • Lead
  • Stainless steel
  • Galvanized steel

Titanium, this being a very expensive material, but it has been used in certain types of construction. These products are mainly used in roofs with excellent results, to prevent water from entering.

Check out a new product coating for water proofing, stucco refinishing and final stucco finish coat, repainting and refinishing office buildings and residential homes. Therma Finish is a thermal barrier insulative product that can reduce the heat from entering your home or office when applied. Watch for this new product to take the nation by storm and become the never environmentally friendly coating for all types of substrates. Also ThermaFinish is rated as a class A fire spread material, sound barrier, and insulation product with a manufactures 15 year warranty.…

Increase The Security Of Your Construction Site With Lifting Protection;
Construction

Increase The Security Of Your Construction Site With Lifting Protection

A good building fence helps to keep unauthorized people away from the construction site. A (temporary) fence basically consists of a building fence, block and clamp. In some cases, just placing a fence is not enough. To provide construction fences with more stability and safety, there are many extra accessories that you can use. One of the many accessories with which you can provide extra security for construction fences is the lifting protection.

What is a safety device?

Building fences are fixed in a block as standard. However, the fences are loose in the blocks and can be lifted out easily. Without using a safety device, a fence can be pulled diagonally out of the block so that an opening is created through which one can gain access to the terrain.

With the lifting protection, a hook in combination with a clamp ensures that the gate is anchored to the block. This not only ensures a tighter and more stable fence, it also increases   the security   of the construction site.

By applying a lifting protection in combination with the High Security Clamp you ensure that a fence is actually closed. The High Security Clamp can only be opened with a special key, making it impossible to dismantle the clamp with regular tools. When you combine the lifting protection with anti-climb fences and place the clamp on the inside of the site, it is impossible to dismantle the clamp from the outside.

Higher safety and appearance

Due to vandalism and theft, securing a temporary construction site is necessary. Placing construction fences is the first step that is taken in shielding the construction site.

To protect the construction site as optimally as possible, you must pay attention to locking, reinforcing and securing your fencing. Different accessories make it harder to get in.

In addition to lifting protection, there are several accessories that can be applied to the fencing . This includes high security clamps, struts, sight-removing cloths, hinge rings or semi-permanent placement.

Use your fencing as a security barrier against thieves and vandals

Increase the security of your construction site by paying attention to your fencing. https://fencebuildersaz.com/chain-link/

Construction

Construction Fences: Types And Features, Classification And Requirements

Any construction, especially if it is in a residential area, is a source of inconvenience and danger to others. In the construction zone, there is a particular technique; electrical equipment is concentrated, real values are stored. To protect people from injuries, and the construction site – from the disruption of the schedule, a scheme for protecting the construction site from the profiled sheet, net or other suitable material is developed and implemented.general contractor phoenix az

Temporary fencing is installed without fail for the duration of the construction, regardless of the length of the work. The package of documents “Organization of construction production” regulates the standards of temporary fences of construction sites, as well as the rules for their operation.

A fence neatly surrounds the construction site

Temporary fencing should be installed near all potentially dangerous objects, which include:

  • Building sites (scaffolding, household towns);
  • Places for the dismantling of buildings;
  • Objects under repair (bridges, road surfaces);
  • Temporary earthworks (trenches, excavations, open sewerage hatches);
  • Emergency areas (screes, landslides, dips).

Also, mass events, requiring maintenance of order (concerts, sports competitions, rallies), parking lots, dangerous avalanche sections of ski runs are temporarily sheltered.

—————–

Basic requirements for temporary fences

Building fence allows you to identify the boundaries of the site quickly; installation can be carried out if the following standards make the structure:

  • The height of protective and security fences (including fences with a visor) is 2 m; standard protective fences (without screen) – 1.6 m, fencing workplaces – 1.2 m.
  • Protective screens are made with a rise of 20 ° to the road.
  • The length of spans (rectangular sections) is limited to 1,2, 1,6 or 2 meters.
  • For pedestrians, a strip of width 1.2-1.5 m is allocated from the outside of the fence.
  • There are gates (sufficient for passage of construction equipment) and a gate. The strength of the wall controls the entire service life; it must withstand the effects of wind and precipitation.

Metal construction with visor

A design that does not meet the requirements can itself become a source of danger. There have been cases of the fall of an inadequately fixed construction fence. It happened that a strong gust of wind tore the weakly attached section. Elements of the structure injured some random passers-by and damaged passing cars. Damage sometimes proved to be significant – the weight per meter of the fence from the metal profile is tens of kilograms. Responsibility for an emergency is borne by the construction organization that installed the fence.